Stainless Steel Sculpting Tools
set of 6 in different shapes and sizes.
Ideal for figure sculpting and customisation
and working with Milliput or Kneadatite
Price £7.99 OUT OF STOCKshapeimage_4_link_0
Milliput Putty
 premium epoxy putty 10g. Use to customise your figures (long hair. etc).
Best used with the Sculpting Set
Watch the Video Tutorial on 
Price £1.50Hand_Tools.htmlhttp://www.youtube.com/watch?v=Unw3ue7AOO0&feature=mfu_in_order&list=ULshapeimage_5_link_0
Kneadatite: 'Green Stuff'
Mixing equal parts of the yellow 'filler' and blue 'hardener' produces a sticky green putty that feels a lot like chewed bubble gum. Once mixed, it has a worklife of 90 minutes, allowing time for shaping and detailing, reaching 'ultimate hardness' after 24 hours. Altering the mix with more blue or yellow component will produce a faster/slower and harder/softer cure.
We recommend to use a little lubricant to prevent Green Stuff from sticking. Normally water is enough but some people also use others such as Vaseline, petroleum jelly or even jhonson baby oil to get smooth surfaces. Keep wet fingers and tools to make easier the sculpting and modeling process. You may also add talcum powder to reduce the stickiness and avoid fingerprints.
 
This set contains 2 inches of material --> 5 cm
Price £1.25
New generation of sculpting putty designed specially for miniature sculptures. Like all epoxy putties you mix the two components and it will slowly dry. Procreate as a fine, non-grainy consistency that makes it easy to mix, sculpt, smooth and allows for extremely fine detail.
 
Its grey colour helps to get the correct perspective so the finish rersult has the size you intend to.
 
It is less sticky than other putties, that means that less lubrication is required for the tools but also a little less adherence to the model, and it has very little shape memory, which is the tendency to return to its original shape if pulled, squashed or twisted. 
 
Curing time modifications:
• Place the mixed ProCreate in the freezer to stop hardening.
• Place the mixed ProCreate under a warm lamp (95˚ F / 35˚ C max – oven recommended) to speed the hardening process.
• Thin sections will cure more slowly
This Set contains aprox. 11 gr (2x 5.5gr of each component)
Price £2.25
Silicone Shapers size #0 Black Firm
Silicone tipped shaper t tools to sculpt and add incredible effects when modelling and sculpting with different putties, clays and fimo. They are somewhere between a brush, a palette knife, a modelling tool and your fingers. Easy-to-clean and long lasting.
Non absorbent - Silicone tips in colour black (FIRM hardness) 
This set is coming with 5 different brushes with 5 different tips with 6mm length by 3 mm width - SIZE #0
Price £9.80